SCULPFUN S6 Pro 60W CO2 Effect CNC Laser Engraver 410x420mm LD+FAC Spot Compression Engraving Cutting Fixed-Focus Laser
【60W Effect Unique Spot Compression Laser】: S6 pro uses the latest 5.5W diode spot compression laser. It has an ultra-fine square laser focus and has twice as cutting penetration and accuracy as ordinary lasers. EVEN IN SPOT COMPRESSION LASERS, the S6 Pro has thinner engraving marks and more robust cutting and penetration capabilities. It can cut 10mm thick wooden boards and engrave ceramics and metals, which is almost beyond the effect of a 60W CO2 laser.
【New Eye Protection Design】: The laser filter covers 98% of the ultraviolet light to the eye; you and the people around you can watch laser engraving without wearing goggles. The cover also prevents animals from grabbing the laser spot.
【Fast Focusing Design】: S6 Pro combined fixed focus laser and sliding design. You only need to slide the laser and tighten the screw to complete the focusing.
【Solid and Quick Assembly Structure Design】: The all-metal structure design makes the machine more solid and improves engraving accuracy. The whole structure is designed for quick installation; it usually takes 10-20 minutes to finish the installation.
【Widely Compatibility】: The machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, and also supports MAC system(LightBurn), engraving file supports JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
【Square Measuring Ruler Axis】: X-Y-axis contains precise scale lines, which is convenient for you to measure the size of engraving objects. The 410x420mm large engraving area can meet various engraving needs.
【Safety Design & A4 Size Steel Pad】: There is a power switch for emergency power off on the machine. Fixing holes are reserved on the four feet and the body to restore the device and the data cable. A gift of an A4 size steel pad can well protect your table from laser damage.
Product Model: SCULPFUN S6 Pro
Laser effect power: 60W (cutting effect similar to 60W CO2 laser)
Max Machine Electricity Power: 30W
Power Supply: 100-240V AC, 50/60HZ
Output: 12V 5A
Engraving Size: 410*420mm
Engraving Materials: wood, paper, cardboard, plastic, leather, PCB board, aluminum oxide, black-painted metal/ceramic
Cutting Material: cardboard, fabric, wood board, bamboo, acrylic, plastic board
Laser Output Optical Power: 5.5-6W
Laser Wave Length: 455±5nm
Engraving Accuracy: 0.01mm
Focusing Method: fixed focus laser + sliding device
Laser Protective Cover: The light filter cover on the laser protects the user's eyes and prevents animals from grabbing the laser spot.
Operating Software: LaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF, and other image formats.
Data Transmission Method: USB connection
Equipment Size: 52 * 57 * 25cm / 20.5 * 22.4 * 9.8in
Equipment Net Weight: 3.0kg / 6.6lbs
Package Size: 61.5 * 34.5 * 13.0cm / 24.2 * 13.6 * 5.1in
Package Weight: 4.4kg / 9.7lbs
For detailed machine instructions, please refer to the manual for parameter settings.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you MUST wear goggles.
Please do not touch the laser emitter with your hand, or it may burn your hand.
Please avoid a substantial impact on the machine.
Children under 21 are not allowed to use this product, and children over 21 need adult supervision.
The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
1 * X-Axis Assembly
2 * X Shaft
Two * Y Shaft
1 * Control Box Module Set
3 * Support Feet
1 * Laser Module Set
1 * 12V 5A Power Adapter
1 * Power Cord
1 * USB Cable
1 * Step 1~5 Screw Installation Package
Two * Belt
1 * T-shaped M5 Screwdriver
1 * L-shaped M4 Screwdriver
1 * L-shaped M3 Screwdriver
1 * 8-10mm Nut Wrench
Ten * Tie
One * Brush
1 * Laser Goggles
2 * 10x10cm Wood Pieces 3mm Thickness
1 * A4 Size Steel Desktop Protection Pad
- Brand Name: SCULPFUN
- Model Number: Laser Engraver
- Origin: CN(Origin)
- CE Certification: Yes
- Certification: CE
- Interface Type: USB
- Engraving Size: 410*420mm
- Laser Output Optical Power: 5.5-6W
- Laser Wave Length: 455; 5nm
- Engraving Accuracy: 0.01mm
- Max Machine Electricity Power: 30W
- Focusing method: fixed focus laser + sliding device
- Laser effect power: 60W (cutting effect similar to 60W CO2 laser)